Okay, with a torque wrench, tighten the nut to 22 foot-pounds.

Jul 01, LOWER CONTROL ARM REMOVAL 1) Raise and support vehicle. 3) Remove the steering knuckle. Remove the bolts fastening the power steering cooler to the front suspension cradle crossmember reinforcement (Fig. 21). 5) Remove the lower control arm rear bushing retainer bolts located on each side of each lower control arm rear bushing. Jan 02, Nice closeup shot on the front bush on the lower control arm. When you jump on the brakes that baby gets to do a heap of work.

Re-attaching the front shock absorber to the lower control arm. Getting it all back together again. Lower control arm is back in place and shock absorber has been re-attached. Same as the previous photo, but on the passenger side of the car. Everything has been. A full front end B-Series kit is, so you could replace every bush at the same time.

I'm sure if you did most of the work yourself and got someone like Pedders to remove the bushes for you, it would be a fairly inexpensive job. Top. Profile. roobin. Post subject: Re: BA Falcon front inner control arm bushes lower. Jul 01, LOWER CONTROL ARM REMOVAL 1) Raise and support vehicle. 3) Remove the steering knuckle. Remove the bolts fastening the power steering cooler to the front suspension cradle crossmember reinforcement (Fig.

21). 5) Remove the lower control arm rear bushing retainer bolts located on each side of each lower control arm rear bushing. Ford Falcon BA, BF, FG / Territory SX, SY Control Arm Upper Inner Kit Note: Polyurethane bushes must be fitted as per diagram attached. o Wheel-align the vehicle before the job is started and note the rear settings; o Remove the Rear Upper Control arms according to the manufacturer’s instructions.

Jan 16, Stt meaning in tree pruning the 15mm nut from the top of the sway bar link. Hold the sway bar link sleeve with locking pliers. Remove the bushing from the top of the sway bar link. Remove the 16mm bolt from the bottom of the sway bar link. Drive the link out of the sleeve with a hammer and punch. step 3:Removing the Control Arm.

Sep 20, Photo Essay - Replacing Control Arm Bushes. Pulling the thing apart. The brake caliper and disc have been removed (caliper sitting on top of the control arm for now). This is the infamous villain. A lower control arm.

I picked up a spare set of arms from a workshop, bought new bushes from Ford and had them fitted at a suspension workshop. Apr 15, The BF Ford Falcon. 3. Front Ball Joint Replacement. A problem for all models of BA - FG Falcon are failed front ball joints.

The double wishbone front suspension is designed with an upper and lower arm that work in conjunction with a spring and shock absorber to provide stable handling characteristics at all speeds.