Join the DecksGo Club!
The treads overhang the stringer on the sides. Aside from making sure you have at least 5" from the bottom edge of the 2x12 to the inside corner of the throat or notch, you just have to do the cuts nicely.
balusters per tread to find the center-to-center distance for the other balusters. For example, if the run is 10" and the maximum spacing required by code is 4"; 10 divided by 4 equals /2 spaces required per tread. Round this up to 3 spaces. Thus, 3 balusters per tread are required. 10" run divided by 3 balusters equals" (/32") center-to-center.
A, B, C, D - ARE YOU USING AN OPENING CAP? Drill a 1/2" hole into the tread, knee wall, or landing tread. Also, drill a 1 1/2" deep hole into the underside of the handrail.
bushmulching.bar STAIRSUPPLIES Beautiful stair creations 1 8For 1/2" balusters use a 5/8" wood bit. For 9/16" balusters use a 3/4" wood bit. Once you have cut the balusters, this will allow.